Say Goodbye to Leaky Valves
Don't put up with leaky tubeless valves that don’t seal. Put your trust in Muc-Off Tubeless Valves and free yourself from the frustration of finding your tyre flat every time you go to ride. Muc-Off Tubeless Presta Valve Kit is supplied with 3 sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect rim seal.
With valves CNC machined from 6061 aircraft-grade aluminium, this kit is compatible with most tubeless ready wheels and tyres and can be used for both Road and MTB. 44mm and 60mm lengths are available to suit almost any rim.
These Muc-Off Tubeless Valve Kits come in a great range of colours to add that extra touch of style to your bike.
• Muc-Off Tubeless Valve Kit
• 80mm Presta Valve
• Premium quality
• Eye-catching anodised Black colour
• Removable valve core
• Compatible with most tubeless-ready wheels and tyres
• Suits MTB or Road
• 6061 Aluminium CNC machined stem
• 6061 Aluminium CNC machined cap
• 4mm machined Allen Key slot for easy installation/removal
• Valve Core Removal Tool (integrated into spare alloy cap)
• Supplied with rubber inserts to fit a variety of rim shapes
• Also sold in an assortment of other eye-popping colours (sold separately)
Directions Of Use
Step 1-Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.
Step 2 – Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
Step 3 - Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole)
Step 3 – Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Step 4 – Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking ring is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
Step 5 – TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
Step 6- Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done