Its large platform and wide open tabs make it easy to clip in/out. Once in, it's spring loaded so your foot sits flat on the whole pedal for maximum contact.
Because Shimano have used the latest iteration of their SPD mountain design, the whole pedal utilises an open style, allowing better mud clearance for those muddy races and rides. The plastic surrounds provide protection for the pedal and resist catching on rocks and other objects.
• SPD Cleat Surfaces: both
• Pop-up Floating Cage: Yes
• Spindle Thread: BC 9/16" x 20T.P.I.
• Cartridge Spindle: Yes
• Cleat Retention Indicator: Yes
• Cleat Retention Adjuster: Yes
• Mud Shedding Design: Yes
• Pedal Body: aluminum/anodized
• Cage: resin
• Use: Enduro/DH/XC/Freeride
• Weight (g): 568
• Sole Fitment: 2 Bolt
• Axle material: Cromoly Steel
• Cleats included: Yes
Dual-sided pop-up bindings that position the pedal body at 12.5 degrees angle for easy and fast entry, with adjustable cleat tension and indicators to show tension for each side.
Pushys Helpful Hints
Pushys Bike Gear helpful hints make your shopping experience easier& help choose the right product. If you need more help contact a Pushys staff Member who Live & Breath Bikes.
Clipless pedals (also clip-in or step-in) require a special cycling shoe with a cleat fitted to the sole, which locks into a mechanism in the pedal and thus holds the shoe firmly to the pedal. Most clipless pedals lock onto the cleat when stepped on firmly and unlock when the heel is twisted outward, although in some cases the locking mechanism is built into the cleat instead of the pedal. Clipless refers to the toe clip (cage) having been replaced by a locking mechanism and not to platform pedals which would normally not have toe clips. The clipless pedal was invented by Charles Hanson in 1895. It allowed the rider to twist the shoe to lock and unlock and had rotational float (the freedom to rotate the shoe slightly to prevent joint strain). The M71 was a clipless pedal designed by Cino Cinelli and produced by his company in 1971. It used a plastic shoe cleat which slid into grooves in the pedal and locked in place with a small lever located on the back side of the pedal body. To release the shoe a rider had to reach down and operate the lever, similar to the way a racing cyclist had to reach down and loosen the toestrap. The lever was placed on the outside edge of the pedal so that in the event of a fall the lever hitting the ground would release the foot. The pedal was designed for racing, in particular track racing, and because of the need to reach them to unclip they have been referred to as "death cleats". In 1984, the French company LOOK applied downhill snow skiing binding or cleat technology to pedals producing the first widely used clipless pedals. Initially used by triathletes in order to facilitate faster "transitions", Bernard Hinault's victory in Tour de France in 1985 then helped secure the acceptance of quick-release clipless pedal systems by cyclists. Those pedals, and compatible models by other manufacturers, remain in widespread use today. The cleat is engaged by simply pushing down and forward on the pedal, or, with some designs, by twisting the cleat in sideways. Then, instead of loosening a toestrap or pulling a lever, the cyclist releases a foot from the pedal by twisting the heel outward.
The next major development in clipless pedals was Shimano's SPD (Shimano Pedaling Dynamics) pedal system. Whereas Look cleats are large and protrude from the sole of the shoe, SPD cleats are small and could be fitted in a recess in the sole, making it possible for walking (although comfort will vary, as the soles of different cycling shoes vary in their rigidity depending on design). Cycling shoes have rigid soles to maximize power transfer and efficiency. They may be specific to road or mountain biking, or usable for both. Shoes designed for mountain biking typically have recessed cleats that do not protrude beyond the sole of the shoe, and have treads for walking on trails, as walking or carrying the bike is often required. Road cycling shoes are typically lighter than their mountain bike counterparts, and feature a protruding cleat and less weather proofing. The protruding cleat makes these shoes impractical for walking, as doing so can damage the cleat. Mountain bike cleats can generally be mounted without difficulty to road shoes although sometimes an adapter is required. Such attachment is not usually possible for road pedals, as the cleats are normally too large to be mounted on mountain shoes. The smaller mountain bike cleats are attached to the sole of the shoe by two bolts; larger road-specific cleats are attached by three. Various manufacturers have produced their own designs of clipless pedal systems over the years, most notably BeBop, Campagnolo, Coombe, Crank Brothers, LOOK, Shimano, Speedplay, and Time.