Work Stands

Feedback Sports Extruded Stop Tube for Repair Stands - Part #13751

Feedback Sports Front Tri-KnobFeaturesDie cast for Pro Elite clamp only.SpecificationsWeight:0.4lbsDimensions:3.5 x 3.5 x 2 in*It is highly recommended that you use Red Loctite when installing this part*

Pro Mechanic HD Leg Collar Replacement leg collar for Pro Mechanic HD repair stand. Fits above tripod leg fitting to secure tripod fitting to main tube. Comes complete with bushings.

Pro E Lift, Pro Mechanic HD & Pro Mechanic Front Spinner Knob Front Spinner Knob for the Pro E Lift, Pro Mechanic HD and Pro Mechanic. It is highly recommended that you use Red Loctite when installing this part. Note: Not compatible with older...

Pro E Lift and Pro Mechanic HD Clutch Body Replacement clutch body for Pro E Lift and Pro Mechanic HD bicycle repair stands. Includes through bolts for installation to telescoping upper tube.

Feedback Sports Pro Mechanic HD / Pro E / Pro Air Hinge Pin Replacement hinge pin for Pro E Lift and Pro Mechanic HD bicycle repair stand. Includes Loctite thread locking compound, fixing bolt and washer.  

Pro E Lift, Pro Mechanic HD Clamp Slide Strip Pads (Set of 4) Set of four protective rubber strips for the clamp jaw slide on the Pro E Lift and Pro Mechanic HD repair stands.

Pro E Lift, Pro Mechanic HD & Pro Mechanic Rear Tri-Knob Die cast metal rear tri-knob for Pro E Lift, Pro Mechanic HD and Pro Mechanic repair stands. Includes red dust cap. Note: Not compatible with older Feedback Sports repair stands such as the...

Pro Mechanic HD Leg Assembly Single replacement leg for Pro Mechanic HD repair stand tripods.  Includes a riveted leg brace, foot cap, and clear-backed logo sticker.

Pro Mechanic HD Mast Collar Replacement mast collar for Pro Mechanic HD repair stand. Fits at top of main mast tube to secure the telescoping upper  tube. Comes complete with two bushings.

Pro Mechanic HD Replacement Tripod This Pro Mechanic HD Repair Stand replacement tripod assembly is available as a service part in case your original repair stand is damaged. This replacement lower tripod is only compatible with the Pro Mechanic HD upper...

Pro Mechanic HD Tripod Leg Fitting Replacement tripod leg fitting for Pro Mechanic HD repair stand.

Pro Mechanic Leg Assembly Single replacement leg for Pro Mechanic repair stand tripods.  Includes a riveted leg brace, foot cap, and clear-backed logo sticker.

Pro Mechanic Mast Collar Replacement mast collar for Pro Mechanic repair stand. Fits at top of main mast tube to secure the telescoping upper tube. Old part number 11111. Comes complete with two bushings.

Pro Mechanic Replacement Tripod This Pro Mechanic Repair Stand replacement tripod assembly is available as a service part in case your original repair stand is damaged. The assembly includes the three assembled tripod legs and the center mast tube with...

Half Pulley (One Side Black)SpecificationsWeight: 0.062 lbsDimensions: 3.25 x 1.5 x 3.25 in

Feedback Sports Rear Hand Knob (Rec Stand)Plastic knurled knob with threaded brass insertMay need Axle KitSpecificationsWeight: 0.3lbsDimensions: 3 x 3 x 3 in

Repair Stand Roll Pin Spare Part

Slider fitting for leg/brace attachments. Compatible on all A-Frames.FeaturesReplacement fitting for A-Frame legs/brace interfaceT-Nut hardware and red loc-tite includedSlider fitting also acts as fixed end leg fitting

Screw Packet Velo Cache/Velo Wall Rack (8) M5x0.8x9mm (Zinc) - Replaced with (16819)Screw Packet Velo Cache/Velo Wall Rack (8) M5x0.8x9mm (Black)

Feedback Sports Sprint Bottom Bracket PadsFeaturesComes as a set of twoSimple installation by sliding pads onto bottom bracket cradleProtects frame against paint/structural damageSpecificationsWeight: 0.05lbsDimensions: 5 x 1 x .5 in

Feedback Sports Sprint Female Z-Knob - Part #16692

Sprint Stand Platform (horizontal beam)

Feedback Sports Tall Collar Clamp AssemblyReplacement tall collar for Pro-Elite, Classic and UltralightComes complete with bushings*Note - NOT compatible with older generation repair stands that did not originally come with this collar...

Bike Repair Stand Accessory Feedback Sports repair stands and event storage systems are the premier partner for the most demanding cyclists and mechanics. They’re ultralight, compact, and durable design delivers unmatched stability, adjustability...

Feedback Sports Z-Knob for Sport Mechanic Tall CollarThreaded bolt section is 20.5mmNOT compatible with Event Stand band clamp or old style Sport Mechanic band clamp.Note: This is for the most current telescoping tall collar.

Rotatable clamping mechanism holds Ø25.4~55mm tubes • Quick release for easy adjustment• Fold for better mobility• 3-leg stands stable and portable• Contains paper towel holder *Tools and tray not included

IceToolz Professional Repair Stand With Carry Bag

• E-bike compatible up to 60kg• Rotatable rubber clamp for ø25.4mm ~ ø55mm• Adjustable height from 50cm to 180cm (23.6"~74.8")• 1 turn on the handle = 10cm in height• Integrated wheels for better indoor and outdoor...

Trail Love & CareThis super simple twist-and-push clamp will hold your bike firmly while you give it a little TLC (Trail Love & Care). Reliable tri-leg design creates a stable platform for needed tune ups or repairs, and the aluminum construction...

Foldable, Lightweight Stand This lightweight swivel stand is made of rustproof alloy. After removing the front wheel this stand is ideal for washing your bike and all-around maintenance. The arm angle is adjustable and the tripod base is solid and stable...