Daysaver Incredible Pump

A real pump holding real tools

Small bike frame pumps with good usability and performance are few and far between. How often have we pinched our fingers or got a tennis elbow... We were also annoyed by the fact that there is no pump hose for many models - and if there is, we have unscrewed the valve core more than once when removing it. And, of course, a bike tire pump should be equipped with proper tools. Because having everything you need on the go at your fingertips is simply convenient.

So the Incredible Pumps combine perfectly with these products: Incredible8, Coworking7TL, Pump hose, Incredible DART and the pump mount.

Features

• Integrated Handle: Effective pumping without pinching fingers.
• Real Tools Inside: No matter which Incredible tools you choose to equip the pump, they are ready at the flick of a wrist.
• Pumping directly: Are you the straight forward no bullshit type of rider? Then you can press the pump directly onto a Presta valve, get the job done and ride on.
• Screw on, pull off Hose: Our innovative pump hose (sold separately) can be screwed onto the valve to give you a firm connection which does not come loose when the pumping gets a bit intense. You can easily detach the pump head from the valve by pulling on the release mechanism, allowing you to simply pull the pump head away. Your valve core is guaranteed to stay where it should be.

Functions

• Available in two sizes - 40HV holds one tool, 80HV holds two tools.
• Integrated handle - no finger pinching.
• Holds real tools - no matter which Incredible tools you choose to equip the pump, they are ready at the flick of a wrist.
• Effective pumping - no tennis elbow after pumping, not matter which size you choose.
• Pumping directly by pressing the pump on a Presta valve.
• Optional pumping with our hose.
• Protected from dirt and water.

Specifications

• For MTB and Gravel bikes
• 1 Incredible unit (pump regular) / 2 Incredible units (pump large)
• Up to 80 PSI / 5.5 Bar
• 40 ccm volume (pump 40HV) / 80 ccm volume (pump 80HV)
• 27.5 mm diameter and 124 mm length (pump regular) / 223 mm length (pump large)
• 85 grams (pump 40HV) / 140 grams (pump 80HV)
• Rattle free tool storage
• Presta compatible: all tubeless and non tubeless Presta valves, with or without thread at the shank
• Clik Valve compatibility:
  • the pump is directly compatible with Clik Valve (as Clik Valve provides backwards compatibility with classic pumps). However, for a seamless pump experience we recommend a Clik Valve adapter.
  • the Clik Valve adapter can be screwed directly onto the pump
  • the Clik Valve adapter can be screwed onto the hose
• Schrader compatibility: standard Schrader valves are NOT COMPATIBLE
• Min. valve stem length: 11 mm