Zoom the image with the mouse
Flat Rectangle Base For Quad Lock 360
The Quad Lock 360 consists of a compatible HEAD, ARM, and BASE which enables you to configure a smartphone mount for your active lifestyle. All Quad Lock 360 products & compatible accessories will be marked with the 360 Compatible badge.
Mount Your Quad Lock Case To A Flat Surface
This Quad Lock 360 Flat Rectangle Base allows you to securely fit your mount to a flat surface. This is the 2-Hole model which is made from tough Nylon and will allow mounting on smaller flat surfaces either vertically, diagonally or horizontally. The base is also available in a 4-Hole model. Each base uses the universal AMPs hole spacing standard and the holes will accept 10G or M5 countersunk fasteners. Please note: Screws are not provided for mounting the base to your required surface.
Box Contents
. 1 x Flat Rectangle 2 Hole Base
. 1 x 10mm Spacer
. 1 x M5x30 Screw (for connecting Spacer to Lever Head or 360 Arm)
. 1 x M5x45 Screw (for connecting Spacer to Weatherproof Wireless Charging Head)
Please note: screws are not provided for mounting the base to your required surface
The Quad Lock 360 consists of a compatible HEAD, ARM, and BASE which enables you to configure a smartphone mount for your active lifestyle. All Quad Lock 360 products & compatible accessories will be marked with the 360 Compatible badge.
Mount Your Quad Lock Case To A Flat Surface
This Quad Lock 360 Flat Rectangle Base allows you to securely fit your mount to a flat surface. This is the 2-Hole model which is made from tough Nylon and will allow mounting on smaller flat surfaces either vertically, diagonally or horizontally. The base is also available in a 4-Hole model. Each base uses the universal AMPs hole spacing standard and the holes will accept 10G or M5 countersunk fasteners. Please note: Screws are not provided for mounting the base to your required surface.
Box Contents
. 1 x Flat Rectangle 2 Hole Base
. 1 x 10mm Spacer
. 1 x M5x30 Screw (for connecting Spacer to Lever Head or 360 Arm)
. 1 x M5x45 Screw (for connecting Spacer to Weatherproof Wireless Charging Head)
Please note: screws are not provided for mounting the base to your required surface
. Two hole flat rectangle base for Quad Lock 360 mount
. Securely fix your mount to flat surfaces
. Can be fixed to flat surfaces vertically, diagonally or horizontally
. Holes will accept 10G or M5 countersunk fasteners
. Hardware included for connecting the spacer to a Quad Lock 360 HEAD or ARM
. Also available in a 4-Hole model
. Please note: Screws are not provided for mounting the base to your required surface
Specifications
. Product: Quad Lock 360 Flat Rectangle Base 2 Hole
. Dimensions: 68.5 x 28 x 14mm (L x W x H)
. Dimensions: 2.7" x 1.1" x 0.55" (L x W x H)
. AMPS Hole Pitch: 48.5mm (1.9")
| Price Match | Contact Us Here |
|---|---|
| Easy Returns | Info Here |
| Payment Options | Interest FREE Options Over $30 |
| Fast Shipping | Check Rates Here |
| Pushys ID | 143718 |
Flat Rectangle Base For Quad Lock 360
The Quad Lock 360 consists of a compatible HEAD, ARM, and BASE which enables you to configure a smartphone mount for your active lifestyle. All Quad Lock 360 products & compatible accessories will be marked with the 360 Compatible badge.
Mount Your Quad Lock Case To A Flat Surface
This Quad Lock 360 Flat Rectangle Base allows you to securely fit your mount to a flat surface. This is the 2-Hole model which is made from tough Nylon and will allow mounting on smaller flat surfaces either vertically, diagonally or horizontally. The base is also available in a 4-Hole model. Each base uses the universal AMPs hole spacing standard and the holes will accept 10G or M5 countersunk fasteners. Please note: Screws are not provided for mounting the base to your required surface.
Box Contents
. 1 x Flat Rectangle 2 Hole Base
. 1 x 10mm Spacer
. 1 x M5x30 Screw (for connecting Spacer to Lever Head or 360 Arm)
. 1 x M5x45 Screw (for connecting Spacer to Weatherproof Wireless Charging Head)
Please note: screws are not provided for mounting the base to your required surface
The Quad Lock 360 consists of a compatible HEAD, ARM, and BASE which enables you to configure a smartphone mount for your active lifestyle. All Quad Lock 360 products & compatible accessories will be marked with the 360 Compatible badge.
Mount Your Quad Lock Case To A Flat Surface
This Quad Lock 360 Flat Rectangle Base allows you to securely fit your mount to a flat surface. This is the 2-Hole model which is made from tough Nylon and will allow mounting on smaller flat surfaces either vertically, diagonally or horizontally. The base is also available in a 4-Hole model. Each base uses the universal AMPs hole spacing standard and the holes will accept 10G or M5 countersunk fasteners. Please note: Screws are not provided for mounting the base to your required surface.
Box Contents
. 1 x Flat Rectangle 2 Hole Base
. 1 x 10mm Spacer
. 1 x M5x30 Screw (for connecting Spacer to Lever Head or 360 Arm)
. 1 x M5x45 Screw (for connecting Spacer to Weatherproof Wireless Charging Head)
Please note: screws are not provided for mounting the base to your required surface
. Two hole flat rectangle base for Quad Lock 360 mount
. Securely fix your mount to flat surfaces
. Can be fixed to flat surfaces vertically, diagonally or horizontally
. Holes will accept 10G or M5 countersunk fasteners
. Hardware included for connecting the spacer to a Quad Lock 360 HEAD or ARM
. Also available in a 4-Hole model
. Please note: Screws are not provided for mounting the base to your required surface
Specifications
. Product: Quad Lock 360 Flat Rectangle Base 2 Hole
. Dimensions: 68.5 x 28 x 14mm (L x W x H)
. Dimensions: 2.7" x 1.1" x 0.55" (L x W x H)
. AMPS Hole Pitch: 48.5mm (1.9")