Reverse Components

Refill kit for tubless tire repair kit (without tools). 10 x Repair-strip 1.5 mm 10 x Repair-strip 3.5 mm Weight: 11 g (+/- 5% weight tolerance)  

This 4-piece repair set is a lifesaver in the event of a large puncture when out on the trail. With a few simple steps, punctures can be repaired quickly, to get you back on the trail, with no...

Reverse Components Ahead Cap w/Screw Features Screw: M6 x 32mm Weight: 8 g (+/- 5% weight tolerance) Material: Aluminium

The Barspin Topcap allows you to rotate the handlebars and a full 360 degrees without the front brake cable becoming tangled. The hollow starnut design routes the front brake hose through the...

The Barspin Topcap allows you to rotate the handlebars and a full 360 degrees without the front brake cable becoming tangled. The hollow starnut design routes the front brake hose through the...

The Barspin Topcap allows you to rotate the handlebars and a full 360 degrees without the front brake cable becoming tangled. The hollow starnut design routes the front brake hose through the...

The Black One is Reverse Components' performance-driven saddle solution for modern enduro and e-bike riding, developed and refined over two years of testing in the Enduro World Series. Built to...

Maximum grip – light weight These are the facts for our TITANIUM pedal of the Black ONE series.The Black One TITANIUM pedal is 65 g lighter than our conventional Black One pedal and weighs...

Reverse Components Centerlock adapters are only approved for use with one-piece disc rotors, and up to a size of 203 mm. When using two-piece brake discs, proper assembly of the lock ring cannot be...

The Black One Chain Ring is made for all single Ring applications where stiffness and light weight are needed. The Narrow Wide sprocket design will help to hold the chain in place. Suitable for most...

The sale is made in a set of 4 pieces including 4 x 2,5 mm spacers. Length: 7 mm Weight: 9 g (set 4 piece, +/- 5% weight tolerance)  Material: Aluminium...

Set of 4 pieces including 4 x 2.5 mm spacers.

Set of 4 pieces including 4 x 2.5 mm spacers.

Set of 4 pieces including 4 x 2.5 mm spacers.

Less complication = More riding time! That was the aim with Reverse Components' SB One collab chain tensioner. Bikepark laps, freeride lines and gravity focused riders often don't need the...

Screw for attaching the Colab chain tensioner to the derailleur hanger. Compatibility: Colab chain tensioner (part-no. 40221) Weight: 15 g (+/- 5 % weight tolerance) Size: M10x20 mm Material:...

SIMPLE JUST GOT BETTER – Chain Tensioner Expert The Colab Expert Chain tensioner is the newest addition to the Singlespeed drivetrain family. Providing a highly secure, robust and...

COLAB PRO TENSIONER - COMING IN CLUTCH The king of Reverse Components' chain tensioner range. Offering a user adjustable clutch system, the COLAB PRO allows the rider to fine tune the level of...

The king of our chain tensioner range. Offering a user adjustable clutch system, the COLAB PRO allows the rider to fine tune the level of tension on the chain, to give the quietest ride no matter...

Reverse aluminium pulley set, for Colab chain tensioners, with sealed ball bearings Take your rear derailleur or Colab chain tensioner to the next level with stylish and high-quality pulley set...

Maximum control in every corner, on every trail, in any weather. The new DELTA high-performance mountain bike brake disc produced in Germany, at 2.0mm thickness it is extremely warp-resistant,...

The DH Angle-Spacer is for 1.5" head tubes reduced to 1 1/8" stems of double crown forks. The DH angle spacer makes the head angle half a degree (- 0.5°) slacker which allows you to get even...

Not suitable for the PM-PM Ø180 (20 mm) adapter.  

Coloured steel Disc Rotor Bolts. • Torx T25 screws M5 x 10 mm• Weight: 26 g (+/- 5% weight tolerance)• Material: Steel S10B21 / class 10.9

Forged, machined aluminium disc calliper adapters in variety of lengths. model: PM-PM +43 fork/frame mount: (PM) 74mm caliper: post mount 74mm size: +43mm model: PM-PM +40 fork/frame mount: (PM)...

The ELEMENT handlebars of the E-SERIES are characterized by their exceptional strength and stiffness. With the new ELEMENT BUTTING technology we are able to build our handlebars more stable than...

Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal. Due to the production, there are colour deviations between the steel pins and the aluminium pins.

Compatible with all Reverse Black One models, Reverse Escape Pro and Reverse Base pedal.For US size pins we offer three different lengths: S (9mm), M (11mm) and L (13mm)Features. Quantity: 12 pieces...

No more dropped chains. The Flip guide is our latest chainguide solution which allows the user to make quick adjustments and "flip" the guide out of the way by hand when removing the crank.By hand,...

As the name implies, the classic among the reverse handles! It all started with this grip. Reverse Components very first grip model is still one of their most popular items today. This was one of...

As the name implies, the classic among the reverse handles! It all started with this grip. Reverse Cpmponents very first grip model is still one of their most popular items today. This was one of...

As the name implies, the classic among the reverse handles! It all started with this grip. Reverse Cpmponents very first grip model is still one of their most popular items today. This was one of...