A New Safeguard for Rough MTB
Branchy protects the rear derailleur from direct impacts and snagging by rocks, branches, sticks, furrows or any other obstacles in your way. It weighs just 35 grams but it is tough for rough use. Its design allows it to be attached to almost all bikes and all brands in the market.
It can be used with all full suspension systems including high pivot, horst links, virtual pivot, single pivot, Yeti's infinity., and with practically all hardtail bikes too. Branchy is especially recommended for Mountain Biking, Enduro, E-bike, Downhill, and Gravel.
Save Trouble and Money
Branchy solves this problem: Imagine, while riding your bike, a branch or a rock hits the rear derailleur and breaks it. Even worse, the rear hanger might be bent and some of the spokes damaged, too. Your ride is ruined and you have to go straight to the bike shop to repair the mess. And what about the cost of all that? Branchy saves you time, stress and money.
Branchy is completely new from the ground up. Using an engineering approach, 3D models, lots of prototypes and trials, we hit the right design and material to produce an essential component for your bike.
Made to Last
Branchy is designed to withstand really tough handling. It is made from high mechanical performance thermoplastic the perfect mix of highest impact resistance, flexibility and lightness.
The clamps which are included are made from flexible polyamide with excellent compression and tensile strength. They are highly durable and have a flat head for a perfect fit and integration.
Branchy
. Weight: 35g aprox.
. High mechanical performance thermoplastic
. High impact resistance
. High durability UV
. Fully operational under extreme temperatures
. High resistance to oil, grease and chemicals
. No water absorption
. Compatible with virtually all rear derailleurs on the market
Clamps
. Made of Polyamide 11, a sustainable bioplastic
. Innovative head design with a flat rounded head profile
. Easy to clamp.
. No tools required
. High resistance
. Soft and flexible
. UV High resistance
. High resistance to chemicals
. Low water absorption
Installation Instructions
1. Place the Branchy: Put the rear derailleur in the lowest cog. Peel off the adhesive tape. Lay it flat. Leave at least 1 cm between the derailleur and the inner surface of the Branchy blade. Sit on the bike and check.
2. Adjust It: Start clamping it. Ensure that the inner edge of the Branchy blade is vertically aligned.
3. Check and Go: Make sure that the Branchy is not touching the chain line or wheel. Tighten firmly and trim the clamps. Check regularly.
| Price Match | Contact Us Here |
|---|---|
| Easy Returns | Info Here |
| Payment Options | Interest FREE Options Over $30 |
| Fast Shipping | Check Rates Here |
| Pushys ID | 150132 |
A New Safeguard for Rough MTB
Branchy protects the rear derailleur from direct impacts and snagging by rocks, branches, sticks, furrows or any other obstacles in your way. It weighs just 35 grams but it is tough for rough use. Its design allows it to be attached to almost all bikes and all brands in the market.
It can be used with all full suspension systems including high pivot, horst links, virtual pivot, single pivot, Yeti's infinity., and with practically all hardtail bikes too. Branchy is especially recommended for Mountain Biking, Enduro, E-bike, Downhill, and Gravel.
Save Trouble and Money
Branchy solves this problem: Imagine, while riding your bike, a branch or a rock hits the rear derailleur and breaks it. Even worse, the rear hanger might be bent and some of the spokes damaged, too. Your ride is ruined and you have to go straight to the bike shop to repair the mess. And what about the cost of all that? Branchy saves you time, stress and money.
Branchy is completely new from the ground up. Using an engineering approach, 3D models, lots of prototypes and trials, we hit the right design and material to produce an essential component for your bike.
Made to Last
Branchy is designed to withstand really tough handling. It is made from high mechanical performance thermoplastic the perfect mix of highest impact resistance, flexibility and lightness.
The clamps which are included are made from flexible polyamide with excellent compression and tensile strength. They are highly durable and have a flat head for a perfect fit and integration.
Branchy
. Weight: 35g aprox.
. High mechanical performance thermoplastic
. High impact resistance
. High durability UV
. Fully operational under extreme temperatures
. High resistance to oil, grease and chemicals
. No water absorption
. Compatible with virtually all rear derailleurs on the market
Clamps
. Made of Polyamide 11, a sustainable bioplastic
. Innovative head design with a flat rounded head profile
. Easy to clamp.
. No tools required
. High resistance
. Soft and flexible
. UV High resistance
. High resistance to chemicals
. Low water absorption
Installation Instructions
1. Place the Branchy: Put the rear derailleur in the lowest cog. Peel off the adhesive tape. Lay it flat. Leave at least 1 cm between the derailleur and the inner surface of the Branchy blade. Sit on the bike and check.
2. Adjust It: Start clamping it. Ensure that the inner edge of the Branchy blade is vertically aligned.
3. Check and Go: Make sure that the Branchy is not touching the chain line or wheel. Tighten firmly and trim the clamps. Check regularly.