Work Stands

Replaement clamp inlay for Super B work stands. Features Made of environmental friendly TPR plastic Spare part for Super B work stands Set of 2 pcs

Feedback Sports Roll PinFeaturesReplacement roll pin to affix clamp head to tripodSlip fit, to be installed with mallet or hammerCompatible with ALL Feedback Sports repair standsSpecificationsWeight: 0.018lbsDimensions: 2 x .25 x .25 in

Feedback Sports Sprint Bottom Bracket Cradle Assembly - Part #16910

Set of two replacement jaw covers for older clamps with plastic-dipped jaws. Includes four circlips for installation. • Fits the older clamps with plastic-dipped jaws• No cable groove• Plastic cover should be removed before...

The 135-33 Repair Stand Base provides a stable-yet-moveable base for Park Tool Power Lift Repair Stands. Includes built-in levelling screws to ensure the stand is squarely engaged with the floor. • Dimensions: 58 x 89 x 1.2 cm (23" x 35" x 0...

Complete 9mm axle assembly for Sprint platform mountComplete axle assembly with adaptersIncludes all adapters and 9mm fork mount sleeveCompatible with all Sprint standsSpecificationsWeight: 0.443lbsDimensions: 8 x 1 x 1 in

Thrust bearing and washer set for interface of rear tri-knob and clutch body of Pro-Elite or upgrade option for other Feedback Sports clamp style repair stands.FeaturesIncludes: two washers and one thrust bearingOrientation of hardware is:...

Tool tray for expert E132, E133, E134, E135 repair stand. Tools not included.

IceToolz E613 Team Workshop Stand.

Replacement Feedback Sports Collar Clamp (#16424) around telescoping collar bushing for Pro-Elite, Pro-Ultralight and Pro-Classic. Please note, that this is an earlier generation band clamp and is NOT interchangeable with the current Tall Collar design....

Free Collar Assembly (sprint)

Feedback Sports Lock NutEnclosed nylon lock-nut for collar clampsUse with Sport Mechanic, Event Stand, and Velo Column collar clampsSpecificationsLock nut hardware for all Z-Knobs.

IceToolz P61H Wheel Stabilizer.

Bring your Adjustable Linkage Clamp back to life with this set of the most common replacement parts for the 100-3C and 100-5C clamps.Features#107S-2 Pin with Circlip & Washers (qty. 2)#108S-2 Pin with Circlip & Washers#116S Cap Screw 5/16 - 18 x 3/8 (qty...

The Topeak Prepstand Carry Bag is an essential carry/storage bag for Topeak's PrepStand eUP. Four internal mesh pockets and padded handle/shoulder strap provides enough room and comfort to carry and store essential gear, so you can take the stand with...

PREPSTAND PROA pro-level workstand with a built-in digital weight scale. The stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening/releasing the clamp with ease.. Clamp head rotates 360 and features...

Bicycle Tool SpecialistsCyclus Tools are developed for the professional workshop. Manufactured in Europe using high grade materials and regular quality control they are of the highest standard. With a wide range of specialist tools, Cyclus provides...

Brass nut. You will need Red Loctite when installingSpecificationsWeight: 0.1lbsDimensions: 0.75 x 0.75 x 0.75 in

Clutch Cup, arm engaging, Elite (silver)

Collar assembly for Velo ColumnReplacement collar for telescoping top tubeIncludes Z-Knob and hardwareSpecificationsFor Velo Column telescoping top tube and most current Sport Mechanic sliding leg fittingWeight: 0.25 lbsDimensions: 3 x 3 x .75 in

Fin-barbed plastic finishing plugFeaturesRounded outer edge to give clean, finished look to horizontal tube of A-Frame/Event Stand.Fits flush with 1.75? O.D. tubing.Snugly fits 1.7? I.D. tubing.SpecificationsWeight: 0.1 lbsDimensions: 2 x 2 x 2 in

Feedback Sports Extruded Stop Tube for Repair Stands - Part #13751

Feedback Sports Front Tri-KnobFeaturesDie cast for Pro Elite clamp only.SpecificationsWeight:0.4lbsDimensions:3.5 x 3.5 x 2 in*It is highly recommended that you use Red Loctite when installing this part*

Half Pulley (One Side Black)SpecificationsWeight: 0.062 lbsDimensions: 3.25 x 1.5 x 3.25 in

Feedback Sports Rear Hand Knob (Rec Stand)Plastic knurled knob with threaded brass insertMay need Axle KitSpecificationsWeight: 0.3lbsDimensions: 3 x 3 x 3 in

Slider fitting for leg/brace attachments. Compatible on all A-Frames.FeaturesReplacement fitting for A-Frame legs/brace interfaceT-Nut hardware and red loc-tite includedSlider fitting also acts as fixed end leg fitting

Screw Packet Velo Cache/Velo Wall Rack (8) M5x0.8x9mm (Zinc) - Replaced with (16819)Screw Packet Velo Cache/Velo Wall Rack (8) M5x0.8x9mm (Black)

Feedback Sports Sprint Bottom Bracket PadsFeaturesComes as a set of twoSimple installation by sliding pads onto bottom bracket cradleProtects frame against paint/structural damageSpecificationsWeight: 0.05lbsDimensions: 5 x 1 x .5 in

Feedback Sports Sprint Female Z-Knob - Part #16692

Sprint Stand Platform (horizontal beam)

Feedback Sports Tall Collar Clamp AssemblyReplacement tall collar for Pro-Elite, Classic and UltralightComes complete with bushings*Note - NOT compatible with older generation repair stands that did not originally come with this collar...