Bottom Bracket Tools

The 647L is an M47 x 1.0 left-hand threaded tap designed for use with the BTS-1 Bottom Bracket Tapping Set to tap T47 bottom bracket shells. This tap is used on the drive side (right side) of the bike. Specifications:• M47 x 1.0 left-hand...

The 647R is an M47 x 1.0 right-hand threaded tap designed for use with the BTS-1 Bottom Bracket Tapping Set to tap T47 bottom bracket shells. This tap is used on the non-drive side (left side) of the bike. Specifications: • M47 x 1.0 right-hand...

The 648L is an M47 x 1.0 left-hand threaded standard guide for use when facing bottom bracket shells with the BFS-1 Bottom Bracket Facing Set and 690-XL Oversized Facer. This guide is used on the drive side (right side) of the bike. Specifications:•...

The 648R is an M47 x 1.0 right-hand threaded standard guide for use when facing bottom bracket shells with the BFS-1 Bottom Bracket Facing Set and 690-XL Oversized Facer. This guide is used on the non-drive side (left side) of the bike...

The 690 is a facing cutter designed to be used in conjunction with the HTR-1, HTR-1B, BFS-1, or BTS-1 to face head tubes and press fit bottom bracket shells. Faces the following bottom bracket standards:• English threaded• Italian...

A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 36-notch tool fittings, including Praxis Works M35. Manufactured in-house by Park Tool, anodized for easy identification and featuring a...

Wrenches to adjust headset, pedals and Octalink bottom bracket.

Tool for the bottom bracket. With square socket for ratchet.

FeaturesTools and kits to install or remove 30mm bearings.SpecificationsApplication: BB/Bearings

Bottom bracket wrench is used to install or remove external Praxis Works M30 external bottom bracket cups and all other bottom brackets with notch diameter of approximately 46.3. • The 1/2" square on the body of the tool allows for the use of torque...

Their6001 open bore adapter is used to press 28x12 sealed bearings.The adapter is machined with one step at 12mm OD, which fits into the center of the sealed bearing.FeaturesInner hole sized to fit 3/8" ACME threaded rodCompatible with Press-1 or Press-4...