Sold out
Zoom the image with the mouse
Introducing the BrookShield, the mudguard of your dreams. With a superb fit and extended reach, it sits perfectly on your BROOKS saddle. This mudguard doesn't just save your backside from the dreaded dirty wet stripe, it also protects your saddle from road spray off the back wheel which can seriously affect leather. Although developed especially for Brooks saddles, it also provides a good fit for other similar "old style" leather saddles such as Ideale, BLB Mosquito to name a few. Please not this does not fit coil spring saddles.
Fold For Storage
The horizontal scoring line enables you to fold the Ass Saver for easy storage in a jersey pocket or bag. To store folded underneath the saddle is also possible but requires trimming to your specific saddle. This is easily done with a pair of kitchen scissors.
Pre-folding
The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Material
We only use Polypropylene manufactured in Europe. Using the best quality available will ensure a long lasting and well performing Ass Saver. Lower grade plastic will easily crack or deform during use, especially when temperatures drop.
Environment
Polypropylene is one of the most common plastics and is normally used for food packaging for it's non-toxicity and ease of recycling. Most countries have a functioning recycling system for PP and our products are properly labelled to facilitate recycling.
The final products are carefully tested by an independent lab to ensure they meet the highest standards regarding toxic chemical content. All our mudguards passes both REACH and Prop 65 tests.
Packaging sucks and we avoid it as much as we can. This saves important resources in every step of the production and distribution chain and lowers the total environmental impact of our mudguards.
Production
We manufacture all our Ass Savers in Sweden. The factory is a very modern, 14001 ISO-certified and eco award winning facility less than an hours drive from our office in Gothenburg. We are proud to say that our products are being made under some of the strictest regulations in the world regarding workers rights and environmental protection.
Fold For Storage
The horizontal scoring line enables you to fold the Ass Saver for easy storage in a jersey pocket or bag. To store folded underneath the saddle is also possible but requires trimming to your specific saddle. This is easily done with a pair of kitchen scissors.
Pre-folding
The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Material
We only use Polypropylene manufactured in Europe. Using the best quality available will ensure a long lasting and well performing Ass Saver. Lower grade plastic will easily crack or deform during use, especially when temperatures drop.
Environment
Polypropylene is one of the most common plastics and is normally used for food packaging for it's non-toxicity and ease of recycling. Most countries have a functioning recycling system for PP and our products are properly labelled to facilitate recycling.
The final products are carefully tested by an independent lab to ensure they meet the highest standards regarding toxic chemical content. All our mudguards passes both REACH and Prop 65 tests.
Packaging sucks and we avoid it as much as we can. This saves important resources in every step of the production and distribution chain and lowers the total environmental impact of our mudguards.
Production
We manufacture all our Ass Savers in Sweden. The factory is a very modern, 14001 ISO-certified and eco award winning facility less than an hours drive from our office in Gothenburg. We are proud to say that our products are being made under some of the strictest regulations in the world regarding workers rights and environmental protection.
. Keeps your backside dry on wet roads
. Protects your leather Brooks saddle from deterioration due to road spray
. Developed especially for Brooks saddles
. Note: Does not fit coil spring saddles
. Weight: 21g
| Price Match | Contact Us Here |
|---|---|
| Easy Returns | Info Here |
| Payment Options | Interest FREE Options Over $30 |
| Fast Shipping | Check Rates Here |
| Pushys ID | 147908 |
Introducing the BrookShield, the mudguard of your dreams. With a superb fit and extended reach, it sits perfectly on your BROOKS saddle. This mudguard doesn't just save your backside from the dreaded dirty wet stripe, it also protects your saddle from road spray off the back wheel which can seriously affect leather. Although developed especially for Brooks saddles, it also provides a good fit for other similar "old style" leather saddles such as Ideale, BLB Mosquito to name a few. Please not this does not fit coil spring saddles.
Fold For Storage
The horizontal scoring line enables you to fold the Ass Saver for easy storage in a jersey pocket or bag. To store folded underneath the saddle is also possible but requires trimming to your specific saddle. This is easily done with a pair of kitchen scissors.
Pre-folding
The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Material
We only use Polypropylene manufactured in Europe. Using the best quality available will ensure a long lasting and well performing Ass Saver. Lower grade plastic will easily crack or deform during use, especially when temperatures drop.
Environment
Polypropylene is one of the most common plastics and is normally used for food packaging for it's non-toxicity and ease of recycling. Most countries have a functioning recycling system for PP and our products are properly labelled to facilitate recycling.
The final products are carefully tested by an independent lab to ensure they meet the highest standards regarding toxic chemical content. All our mudguards passes both REACH and Prop 65 tests.
Packaging sucks and we avoid it as much as we can. This saves important resources in every step of the production and distribution chain and lowers the total environmental impact of our mudguards.
Production
We manufacture all our Ass Savers in Sweden. The factory is a very modern, 14001 ISO-certified and eco award winning facility less than an hours drive from our office in Gothenburg. We are proud to say that our products are being made under some of the strictest regulations in the world regarding workers rights and environmental protection.
Fold For Storage
The horizontal scoring line enables you to fold the Ass Saver for easy storage in a jersey pocket or bag. To store folded underneath the saddle is also possible but requires trimming to your specific saddle. This is easily done with a pair of kitchen scissors.
Pre-folding
The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Material
We only use Polypropylene manufactured in Europe. Using the best quality available will ensure a long lasting and well performing Ass Saver. Lower grade plastic will easily crack or deform during use, especially when temperatures drop.
Environment
Polypropylene is one of the most common plastics and is normally used for food packaging for it's non-toxicity and ease of recycling. Most countries have a functioning recycling system for PP and our products are properly labelled to facilitate recycling.
The final products are carefully tested by an independent lab to ensure they meet the highest standards regarding toxic chemical content. All our mudguards passes both REACH and Prop 65 tests.
Packaging sucks and we avoid it as much as we can. This saves important resources in every step of the production and distribution chain and lowers the total environmental impact of our mudguards.
Production
We manufacture all our Ass Savers in Sweden. The factory is a very modern, 14001 ISO-certified and eco award winning facility less than an hours drive from our office in Gothenburg. We are proud to say that our products are being made under some of the strictest regulations in the world regarding workers rights and environmental protection.
. Keeps your backside dry on wet roads
. Protects your leather Brooks saddle from deterioration due to road spray
. Developed especially for Brooks saddles
. Note: Does not fit coil spring saddles
. Weight: 21g