Spares

Pro E Lift, Pro Mechanic HD Clamp Slide Strip Pads (Set of 4) Set of four protective rubber strips for the clamp jaw slide on the Pro E Lift and Pro Mechanic HD repair stands.

Pro E Lift, Pro Mechanic HD & Pro Mechanic Rear Tri-Knob Die cast metal rear tri-knob for Pro E Lift, Pro Mechanic HD and Pro Mechanic repair stands. Includes red dust cap. Note: Not compatible with older Feedback Sports repair stands such as the...

Pro Mechanic HD Leg Assembly Single replacement leg for Pro Mechanic HD repair stand tripods.  Includes a riveted leg brace, foot cap, and clear-backed logo sticker.

Pro Mechanic HD Mast Collar Replacement mast collar for Pro Mechanic HD repair stand. Fits at top of main mast tube to secure the telescoping upper  tube. Comes complete with two bushings.

Pro Mechanic HD Replacement Tripod This Pro Mechanic HD Repair Stand replacement tripod assembly is available as a service part in case your original repair stand is damaged. This replacement lower tripod is only compatible with the Pro Mechanic HD upper...

Pro Mechanic HD Tripod Leg Fitting Replacement tripod leg fitting for Pro Mechanic HD repair stand.

Pro Mechanic Leg Assembly Single replacement leg for Pro Mechanic repair stand tripods.  Includes a riveted leg brace, foot cap, and clear-backed logo sticker.

Pro Mechanic Mast Collar Replacement mast collar for Pro Mechanic repair stand. Fits at top of main mast tube to secure the telescoping upper tube. Old part number 11111. Comes complete with two bushings.

Pro Mechanic Replacement Tripod This Pro Mechanic Repair Stand replacement tripod assembly is available as a service part in case your original repair stand is damaged. The assembly includes the three assembled tripod legs and the center mast tube with...

Half Pulley (One Side Black)SpecificationsWeight: 0.062 lbsDimensions: 3.25 x 1.5 x 3.25 in

Feedback Sports Rear Hand Knob (Rec Stand)Plastic knurled knob with threaded brass insertMay need Axle KitSpecificationsWeight: 0.3lbsDimensions: 3 x 3 x 3 in

Repair Stand Roll Pin Spare Part

Slider fitting for leg/brace attachments. Compatible on all A-Frames.FeaturesReplacement fitting for A-Frame legs/brace interfaceT-Nut hardware and red loc-tite includedSlider fitting also acts as fixed end leg fitting

Screw Packet Velo Cache/Velo Wall Rack (8) M5x0.8x9mm (Zinc) - Replaced with (16819)Screw Packet Velo Cache/Velo Wall Rack (8) M5x0.8x9mm (Black)

Feedback Sports Sprint Bottom Bracket PadsFeaturesComes as a set of twoSimple installation by sliding pads onto bottom bracket cradleProtects frame against paint/structural damageSpecificationsWeight: 0.05lbsDimensions: 5 x 1 x .5 in

Feedback Sports Sprint Female Z-Knob - Part #16692

Sprint Stand Platform (horizontal beam)

Feedback Sports Tall Collar Clamp AssemblyReplacement tall collar for Pro-Elite, Classic and UltralightComes complete with bushings*Note - NOT compatible with older generation repair stands that did not originally come with this collar...

Bike Repair Stand Accessory Feedback Sports repair stands and event storage systems are the premier partner for the most demanding cyclists and mechanics. They’re ultralight, compact, and durable design delivers unmatched stability, adjustability...

Feedback Sports Z-Knob for Sport Mechanic Tall CollarThreaded bolt section is 20.5mmNOT compatible with Event Stand band clamp or old style Sport Mechanic band clamp.Note: This is for the most current telescoping tall collar.

Genuine Park Tool 107S-2 long clevis pin with circlips for PRS workstands.Product Number. #107S-2

Park Tool 109 S Spring pin 5/32 x 1-1/4 for PRS-2 Deluxe Double Arm Repair Stand. Product Number. #109S

Genuine Park Tool replacement linkage pivot bolt for PCS-1 & PCS-2.Product Number. #112A

Genuine Park Tool replacement eye bolt for PRS-2 PRS-3 PRS-4 & PRS-5 Workstands. Product Number 117S

Genuine Park Tool replacement adjustable linkage assembly for PCS-4, PRS-2-7 workstandsProduct Number. #122S

A durable, versatile, easy-to-use clamp built for everyday shop use. Features a cam-actuated micro-adjust clamping system for easy entry and exit, which opens to fit nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes...

A durable, versatile, easy-to-use clamp built for everyday shop use. Features a cam-actuated micro-adjust clamping system for easy entry and exit, which opens to fit nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes.Micro...

Our tried-and-true adjustable linkage clamp design has been a constant companion for professional mechanics around the world for over 50 years, and it still securely holds most traditional seat posts and frames. A great option for assemblers and...

Park Tool ES-2 The ES-2 includes everything needed to extend the length of the ES-1 Event Stand by an additional eight feet. Multiple ES-2 kits can be used in tandem with an ES-1 to create an event stand of any length in eight foot increments...

Replacement motor for PRS-33.2 Park Tool workstand.

Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK to the design of the PRS-33.2. Includes:• #2125-2 Plastic Thread Forming Screw (qty. 2)• #2138.2 Work Tray Top• #2139...