The Renthal Apex combines All Mountain strength, Enduro stiffness and XC lightweight.
Unique 240 handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars.
The Apex is fully CNC machined, featuring an oversize centre bore, extensive 3-D machining and external webbing to maximise structural strength and stiffness and minimise weight.
Specifications:
. Length: 40mm
. Weight: 118g
. Rise - +/-6
. Clamp Width: 46mm
. Stack Height: 40mm
. Clamp Diameter: 31.8mm
. Steerer Clamp Diameter: 28.6mm
- Zero-gap clamping system give superior support for the handlebar and ensures accurate bolt torque
- Unique clamping system opens up the front of the stem, allowing an oversize centre bore to increase stiffness and strength
- CNC Machined from a solid billet of 2014 aluminium with 7075 aluminium clamps
- Unnecesary material removed during CNC process to minimise weight
- After CNC machining, the stem components are annodised and laser marked to give a very high quality and durable finish
- Flippable stem body to give either a plus 6 or minus 6 rise
- Race winning stem
| Price Match | Contact Us Here |
|---|---|
| Easy Returns | Info Here |
| Payment Options | Interest FREE Options Over $30 |
| Fast Shipping | Check Rates Here |
| Pushys ID | 149627 |
The Renthal Apex combines All Mountain strength, Enduro stiffness and XC lightweight.
Unique 240 handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars.
The Apex is fully CNC machined, featuring an oversize centre bore, extensive 3-D machining and external webbing to maximise structural strength and stiffness and minimise weight.
Specifications:
. Length: 40mm
. Weight: 118g
. Rise - +/-6
. Clamp Width: 46mm
. Stack Height: 40mm
. Clamp Diameter: 31.8mm
. Steerer Clamp Diameter: 28.6mm
- Zero-gap clamping system give superior support for the handlebar and ensures accurate bolt torque
- Unique clamping system opens up the front of the stem, allowing an oversize centre bore to increase stiffness and strength
- CNC Machined from a solid billet of 2014 aluminium with 7075 aluminium clamps
- Unnecesary material removed during CNC process to minimise weight
- After CNC machining, the stem components are annodised and laser marked to give a very high quality and durable finish
- Flippable stem body to give either a plus 6 or minus 6 rise
- Race winning stem